Ford 6.8L

The Ford 6.8L is a popular engine used in step van applications including parcel package, snack food, bread, uniform/laundry and other commercial delivery vehicles. This engine is also found in the Ford E250-E450, Ford F250-F650, Ford Excursion, Ford Super Duty, Ford F53 and F59 stripped chassis, Blue Diamond chassis, Ford F650-F750 Super Duty and Blue Bird Vision.

Reviva uses OEM or equivalent pistons, rings, bearings, valves, gaskets, and other components, making sure this engine will stand the test of time. The engine is dyno tested with the OEM Ford ECM, specific to application, not the generic or modified to “get it close”.

All Reviva engines are assembled in the USA.

Block Configurations

COMPLETE DROP-IN INCLUDES:

ALL PARTS ON THE LONG BLOCK PLUS

Water pump - New
Thermostat - New
Thermostat housing
Coolant crossover
Heated PCV (when applicable)
Intake manifold
Intake runner controller (when applicable)
Exhaust manifolds
Exhaust manifold heat shields (when applicable)
Throttle body
Spark plugs - New
Ignition coils
Knock sensor harness (when applicable)
Fuel rail
Fuel injectors - New
EVAP purge solenoid - New
Crank position sensor - New
Cylinder head temp sensor - New
Knock sensors - New (when applicable)
Engine oil pressure sensor - New
All gaskets and seals - New

TO PLACE AN ORDER

Call toll-free 877-470-3524

REVIVA’S DYNO TEST

All of Reviva’s Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate cruise segments simulating light, medium, and heavy throttle conditions; maximum torque and horsepower tests; and a black light leak detection test with dyed oil, coolant, and fuel.

WARRANTY COVERAGE

Reviva warrants to the original buyer that every product will be free from proven defects in material and workmanship. Reviva warranty obligation will be limited, at our opinion, to repair or replace with another remanufactured engine. All warranty work must be preauthorized by Reviva. To activate the warranty, all engines must be registered within 30 days from shipment. Drop-In engines carry a full 2 year/unlimited mile warranty.