Cummins ISB07 6.7L HP Common Rail Rear Gear Diesel Engine

Cummins ISB07 6.7L HP Common Rail Rear Gear Diesel Engine

Product Bulletin PDF Download

APPLICATIONS

The ISB07 6.7L Cummins is used in many applications including walk-in vans, buses, yard tractors, and conventional cabs, Ford F650/750 and commercial delivery vehicles, for model years 2007-2009.

Reviva utilizes torque plating methods for boring and honing to ensure block straightness, which reduces break-in time and crankcase pressure. In addition, Reviva uses OEM or equivalent pistons, rings, bearings, valves, and gaskets, making sure that this engine will stand the test of time.

All Reviva engines are assembled in the USA.

Block Configurations

LONG BLOCK INCLUDES:

  • Block
  • Rods
  • Crank gear
  • Piston assemblies
  • Head
  • Rear gear housing
  • Oil cooler
  • Oil filter assembly
  • Water pump
  • Flywheel housing
  • Valve train (lifters, pushrods, & rocker arms)
  • Crankshaft
  • Oil pump
  • Cam gear
  • Camshaft
  • Front gear housing
  • Gasket set
  • Oil pickup tube
  • Oil pan
  • Thermostat

COMPLETE DROP-IN INCLUDES:

ALL PARTS ON THE LONG BLOCK PLUS

  • High pressure fuel pump
  • Injectors
  • Damper & pulley
  • Intake cover & connection
  • Exhaust manifold
  • Fuel manifold
  • EGR piping
  • Coolant inlet manifold
  • Breather element
  • Low & high pressure lines
  • Fuel filter*
  • Turbocharger
  • Valve cover
  • Sensors & switches
  • EGR cooler
  • EGR valve
  • Valve cover
  • Breather cover

*SHIPPED LOOSE

TO PLACE AN ORDER

Before calling to request price and availability, please gather the following information:

  • The original engine serial number
  • The original engine CPL number

The CPL and serial numbers are located on the valve cover.

REVIVA’S TESTING

Every engine is machined using state-of-the-art equipment and assembled using precise and repeatable methods. All engine production follows documented lean manufacturing processes and principles to create consistent quality and dependable outcomes.

Reviva’s Short Block, Long Block, and Long Block Supreme are 100% Sim tested before shipment.

Reviva’s Complete Drop-In engines are 100% dyno tested before shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm-up cycle; three separate cruise segments simulating light, medium, and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant, and fuel.

WARRANTY COVERAGE

On-Road Complete Drop-In configurations: 2yr/unlimited mileage, 2nd-year long block coverage only.
Long Block configurations: 1 year/unlimited mileage.

Motorhome/RV Applications: 1 year parts only 
      (No labor or diagnostic reimbursement)

Some restrictions apply; see limited warranty details or call for more information.

©2017 Reviva, All Rights Reserved.
Reviva is an independent manufacturer and is not affiliated with Navistar, Ford, Cummins, General Motors, or Caterpillar.

ISSUE: ISB07-B